These are laser cut sections of tubes to run your waste-gate back into your exhaust (plumb-back). Take the guess work out of merging the two pipes together. We have developed these tube starters for optimal angle for the gases to exit the waste-tube without restrictions. They are also long enough for a vband flanges to be welded on with clearance for the clamp to be accessed and to be removed without issues.

These tubes can also be used for exhaust cut-outs for dump valves or dump pipes.

For hints & tips on waste-piping CLICK HERE:

• 304 Stainless Steel

• Satin Finish

• Laser Cut

• 45 Degree Merge Angle

These tubes are designed to fit up to exhaust pipes for the following sizes:

• 2.5" Tube Starter = designed to fit onto a 3.5" exhaust

• 2" Tube Starter = designed to fit onto a 3" exhaust

• 1.75" Tube Starter = designed to onto a 3" exhaust

• 1.5" Tube Starter = designed to fit onto a 2.5" exhaust

They can still fit other sizes of tube with a small amount of grinding to alter the shape

Specs of Tubes:

2.5" Overall Length = 125mm

2" Overall Length = 85mm

1.75" Overall Length = 85mm

1.5" Overall Length = 85mm