After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have found the perfect balance of boost control and flow. With minimal back pressure where the manifold meets the turbo, you can be sure that you're getting the best flow possible from your turbo manifold. FLOW = POWER.
NOTE = If you are running air-con the down-pipe will be extremely tight to make, will still work with 35r turbos but if rear housing has extended turbine outlet i.e Efr or Holset then will not work with air-con. Any questions please email us
NOTE = Will not work with 7-8-9 radiators as the top pipe clashes with runners- Earlier model evo radiators will have to be used, or a alloy hard pipe can be welded to the top pipe to keep heat away from silicon or rubber joiner to radiator
- Comes standard with 44mm Tial or 45mm Turbosmart vband wastegate flange
- Features dual 2-1 merge collectors
- 12mm CNC machined flanges
- Runner size = 41mm inside diameter
5 year no crack warranty
10 year no crack warranty if fitted by us in store
Manifold Manufacture Times
Our manifolds are made to order, manufacturing times vary depending on the time of year & our current work load.
Please email or message us if you want to know exact time frames
