This oil feed kit is to suit the rb20 and rb25 factory turbo motors. Suitable for both top and low mounted turbos.
Includes
- 2x M12x1.25 to 4an (1x for block, 1x for factory turbo. Addition fitting may be required for aftermarket turbos)
- 1x Stainless Steel Ptfe 90 Degree Hose End
- 1x Stainless Steel Ptfe 45 Degree Hose End
- 700mm of teflon centered Ptfe stainless braided hose
- 2x copper washers
This is an easy to install kit that will stand the test of time. These are also reusable fittings, just replace the centre olive and youll be good to go again
