This kit is designed is to work on sr20 rwd engines with factory style turbos.
Will work with the following turbos
- PULSAR PSR28 60/67/71 Factory position replacement
- Factory t25 / t28
- Most aftermarket factory position replacement turbos
Can be used on factory det and de engines. If the engine is a +t setup. The waterneck for the top radiator hose will need to be drilled and tapped to m14x1.5
Kit Includes
- 800mm of Teflon PTFE braided stainless hose
- 3x 90 Degree hose ends
- 1x 45 Degree hose end
- 4x M14x1.5 To 6an
- 1x 1/4bsp to 6an (substitutes 1x m14 for the sr20de option)
- copper washers
This kit is resistant to heat as it uses teflon centered hose, far superior to the rubber stainless hose commonly used.
Photos deplayed will show how we usually position the hoses and fittings. 45 degree on the water neck, 90 degree on block and both sides of the turbo
